Products from GMW
No results were found for the filter!
Alloy (CuZn37), malleable when cold, for making clasps. Cut to size 200 x 300mm. Available in the following thicknesses: 0,8mm (Order Nr. 55 008), 1,2mm (Order Nr. 55 012)
From €21.40 *
These water-soluble, anionic dyes are suitable for all open-pored types of leather and have good dyeing properties and a good level of colour fastness. They can be easily applied with a sponge. Use 10g dye to 1 litre of water. All colour...
From €20.40 *
Successor to SELLADERM, metal complex dye concentrates, miscible with water or organic solvents, pH value: 6.5 at 10 g per liter. Deep shades of colour can be achieved quickly using RODA DYE NF. Use 10-200g of dye per liter of water or...
From €23.70 *
The aqueous solution penetrates the leather and causes it to swell, thus improving the ductility. This makes it easier to work with thick, hard types of leather, such as pigskin, when binding books for example. It is also useful for...
€16.95 *
Cleaned and stretched bovine gut, for restoration of parchment, approx. 150 mm wide. Available in following sizes: Length: ca. 10 m (42182), one piece 60 cm long (42186)
From €19.80 *
The binding material is put under tension, by turning the nuts, on which the "gallows" rests, upwards. Binding material of greatly varying thicknesses (from parchment strips to 5mm thick hemp cord) is held firmly in place by the...
€698.00 *
This beautiful and, for book restorers, indispensable piece of equipment is hand-made from beechwood with great attention to detail. The threaded spindles and nuts are turned from the wood of a pear tree. The device can be dismantled for...
From €57.90 *
For books with a maximum thickness of 150mm. This beautiful and, for book restorers, indispensable piece of equipment is hand-made from beechwood with great attention to detail. The threaded spindles and nuts are turned from the wood of...
€256.00 *
For the finishing press, two pieces for attaching to the finishing press, each 38 cm long, with 25 pins, 0,35 kg.
€111.25 *
Precision press on mobile base. The basic model Type 1 consists of the base and the pressing device (pressing jaws 125 mm wide) with a clearance of 430mm or 500mm The pressing device can be tilted to 90° and thus facilitates processing...
From €243.00 *
The mini low-pressure table NSD 110 is a table-top unit without legs. It is easy to transport, assemble and operate, and can be built up on an existing table when needed or integrated into an existing table. The control is adjustable as...
From €1,822.60 *
Viewed