Made from stainless steel, a successful combination of water-basin and vacuum table.

The basic design consists of a frame (7) with a tap to drain off water (6) and a shallow basin (1) which, with a depth of 34 mm, is deep enough for the treatment of individual leaves (C).
Other accessories include a spacer grid (2), a support grid (3) and the stainless steel perforated plate (4). The latter can either be placed directly on the spacer grid to function as a sieve below the surface of the water (B) or can be placed on the support grid so that the table can be used as a vacuum table. (A).

These units have no heating.

Made from stainless steel, a successful combination of water-basin and vacuum table. The basic design consists of a frame (7) with a tap to drain off water (6) and a shallow basin (1) which,... read more »
Close window

Made from stainless steel, a successful combination of water-basin and vacuum table.

The basic design consists of a frame (7) with a tap to drain off water (6) and a shallow basin (1) which, with a depth of 34 mm, is deep enough for the treatment of individual leaves (C).
Other accessories include a spacer grid (2), a support grid (3) and the stainless steel perforated plate (4). The latter can either be placed directly on the spacer grid to function as a sieve below the surface of the water (B) or can be placed on the support grid so that the table can be used as a vacuum table. (A).

These units have no heating.

Close filters
  •  
from to
No results were found for the filter!
Mini Low Pressure Table NSD 110 Mini Low Pressure Table NSD 110
The mini low-pressure table NSD 110 is a table-top unit without legs. It is easy to transport, assemble and operate, and can be built up on an existing table when needed or integrated into an existing table. The control is adjustable as...
From €1,822.60 *
Low Pressure Table NSD 111 / NSD 115 Low Pressure Table NSD 111 / NSD 115
These tables have sturdy legs, square in cross-section, easily mounted with screws. Also located centrally under the table top, a cooling fan which shortens the cooling time from 90°C to 40°C to about 15 min (relevant for thermoplastic...
From €3,010.00 *
NSD 115 mobile NSD 115 mobile
For paper and painting restoration. The uses and technical data correspond to the device NSD 115. The base support is in three sections, which are fixed to the underside of the table with hinges. They are easily folded out and fixed with...
€4,767.80 *
Heated Low Pressure Tables NSD 1101 Heated Low Pressure Tables NSD 1101
Large, solid tables on four adjustable legs or on a mobile chassis, with controls mounted on a short side of the table. Other dimensions can be ordered, also without heating on request. Suction connection under the table plate. Supply3 x...
€0.00 *
Low Pressure Bath-Table BT0710 Low Pressure Bath-Table BT0710
Without a base, can be placed on an available table or on the UE1 Universal table. The low weight enables complete emptying by raising the side opposite the drain, so that dirty water can run into the suction device. We recommend the...
€1,570.00 *
Low Pressure Bath-Table BT1510 Low Pressure Bath-Table BT1510
The large version of this series, with a fixed, mobile base, on which the control for activating the suction device is mounted. The suction level can be regulated by a foot control. The control unit for the vacuum device (ATTIX 30-01) is...
€5,855.00 *
U1E Universal Table U1E Universal Table
Length x width: 1040 x 670 mm, mobile, height adjustable in 50 mm increments from 700 to 860 mm, with three movable shelves, support for mini low pressure table NSD 110 and for low pressure bath-table BT 0710, also suitable for operation...
€365.00 *
Viewed